Order(MOQ):
100kgsPayment:
FOB, CIF, EXWProduct Origin:
ChinaColor:
copperShipping Port:
Guangzhou, Shenzen, FoshanLead Time:
3-15days
Product name:
Electrostatic Paint Silver Golden Hammer Tone Antique Powder Coating
Introduction
Hammer tone texture powder coating is an advanced method of applying a decorative and protective finish. This type of powder coating provide excellent toughness, durability, thickness and decorative effect.
Appearance
There are various appearance,from low gloss to high gloss.
Special Appearance:Texture,sand,metallic or pearl,mixed color,other special appearance upon request.
Physical properties
Special gravity:1.2-1.8(depending on the gloss and color)
Distribution of powder size:100% less than 100 micron (can be adjusted by the application requirement)
Flowability: 120-140
Volatility <0.8%
Cure condition
200ºC(Object temperature)/10mins
180ºC(Object temperature)/15mins
Typical Performance Properties
All the tests as follows are carried out on 0.8mm steel panel with the film thickness of 50-70 microns.
Test Item |
Method |
Standard |
Target |
Gloss |
60°Gloss Tester |
GB/T9754-1988 |
+/- 5% |
Film thickness |
Film thickness Tester |
GB1764-1979 |
60um-70um |
Adhesion |
Cross-cut Tester |
GB/T9286-1998 |
0 Grade |
Film Hardness |
Film Hardness Tester(Japan) |
GB/T6739-1996 |
1H-2H |
Impact |
Impact Tester |
GB/T1732-1993 |
50cm*kg Positive Impact(According to Gloss) |
Mandrel Bend |
180°Bend |
GB/T6742-1986 |
2mm-3mm |
Cupping test |
Erichsen tester |
GB/T9753-1988 |
5mm-6mm |
Color Difference |
Color Difference Tester |
GB/T11186.2-89 |
Dark<1.5,Light<0.5 |
Salt spray |
Salt spray Tester |
GB/T1771-1991 |
500h |
Humidity Test |
Constant temperature and humidity |
GB/T1740-1979 |
500h,Changes<1 Grade |
Bucholz Hardness |
Bucholz Hardness Tester |
GB/T 9275-1988 |
≥80(Length:1.15-1.2) |
Surface |
Visual |
GB/T 9761-1988 |
No Particle above 60um |
The distribution of Particle Size |
Laser particle sizer |
/ |
D(4,3) 35-40um |
Remark:
1)Gloss: Can be adjust from 0 to 95 according to the request of customer
2)Impact: Different gloss has different resistance capability of impact
Smooth:50Kg.cm, Low gloss:40Kg.cm
3)Mandrel Bend: The capability of bend is according to the gloss
4)The distribution of Particle: Use LS-POP(III)Laser particle sizer, it has no standard of tester method defined by the nation.
5)Salt spray and Aging resistance: Will test according to client's request.
6)Cup-process tests may vary slightly depending on the glossy and surface effect of the product, with matte, reluster, and sand-grained cup-processes generally being slightly smaller than high-gloss powders
Average Coverage
9-12 square meters per kilogram at the film thickness of 60 microns.(at 100% powder utilization)
TGIC&Primid
Both TGIC & Primid system are available, we can supply as your requested.
Remark
TDS is for reference only, for special texture powder coating, please contact us, thanks.