Powder Coating Solution-Poor powder fluidization

1. Insufficient compressed air pressure

Solution：Check the compressed air supply, clean the air filtration equipment, and increase the pressure appropriately

2. Microplate is blocked

Solution：Check whether the microplate is blocked by ultra-fine powder or oil and impurities in compressed air

3. The powder is stored in the powder supply drum for a long time to absorb moisture

Solution：You can try to add atmospheric pressure for a long time to the powder fluidization, take away the water, if necessary, with clean utensils to help

4. Powder clumping

Solution：Loosening and sieving the powder

5. Too much powder in the fluidized bed

Solution：Reduce the amount of loaded powder in the bed, the amount of powder is generally added to 2/3 of the volume of the fluidized bed